is1000

SKU DESCRIPTION     201-4495-001 AIMS SOFTWARE PACKAGE   Includes compact disk and parallel port hasp key.     201-4495-002 AIMS SOFTWARE PACKAGE   Includes compact disk and USB port hasp key.     00050103S ANCHOR KIT   Includes 4 drop-in anchors, bolts and washers.   Requires 5/8" masonry bit.     634-0002-001S BEEPER, ALARM   Makes audible noise when unit goes offline.     644-0024-012S BELT, DISPENSER, LARGE, SDD DISPENSER   Large belt, right side, facing front of dispenser.     644-0024-002S BELT, DISPENSER, SMALL, SDD DISPENSER   Small belt, right side, facing front of dispenser.     644-0024-010S BELT, DISPENSER, TIMING SDD DISPENSER   Small belts, left side, facing front of dispenser.     633-0011-003S BULB, FLUORESCENT, KYOCERA   Mounts to bottom of display chassis.   Cannot be used to replace bulbs on SHARP displays.   KYOCERA displays have metal corners on the backside of the    display chassis.   Includes plastic housing.      633-0011-006S BULB, FLUORESCENT, SHARP   Mounts to bottom of display chassis.   Cannot be used to replace bulbs on KYOCERA displays.   SHARP displays have black plastic inserts in the backside corners    of the display chassis.   Does not include plastic housing for bulb. Must use existing housing.     201-2834-002S CABLE, AC POWER RECEPTACLE TO POWER SUPPLY   FOR UNITS W/SDD DISPENSERS.   Used when replacing Power Supplies equipped with terminal strip   connections at TB-2.     201-4299-001S CABLE, CONTROL PANEL PCB TO BALLAST PCB   4 conductor cable.     201-5397-001S CABLE, CONTROL PANEL PCB TO BALLAST PCB   FOR UNITS EQUIPPED WITH TREPP CONTROL PANEL PCB'S.     201-3602-001S CABLE, CONTROL PANEL PCB TO SMALL CARD READER   Flat ribbon cable.     201-4015-001S CABLE, DOWNLOAD, MASTER KEY, LONG CABLE   Has female DB-9 connectors on both ends of the cable.   Requires 201-3649-001S cable to make a complete download cable.     201-3649-001S CABLE, DOWNLOAD, MASTER KEY, SHORT CABLE   Has male DB-9 connector on one end and a 6-pin terminal connector   on the opposite end.   Requires 201-4015-001S cable to make a complete download cable.     201-3585-001S CABLE, MAIN PCB TO BEEPER     201-4297-001S CABLE, MAIN PCB TO COLOR DISPLAY                           201-3620-001S CABLE, MAIN PCB TO CONTROL PANEL PCB   FOR UNITS WITH NON TREPP PCB'S   Comm-1 cable, connects J11 on the Control Panel PCB.    6 conductor cable.     201-5841-001S CABLE, MAIN PCB TO CONTROL PANEL PCB   FOR UNITS EQUIPPED WITH EPPI CONTROL PANEL ASSEMBLIES.   Communication Cable.     201-3586-001S CABLE, MAIN PCB TO DOOR SWITCH     201-3601-001S CABLE, MAIN PCB TO FLOPPY DRIVE   Flat ribbon cable.     201-4328-001S CABLE, MAIN PCB TO MONO DISPLAY     201-3599-001S CABLE, MAIN PCB TO PRINTER PCB   Flat ribbon cable.   Communication cable.     201-3600-001S CABLE, MAIN PCB TO SDD DISPENSER   Flat ribbon cable.     201-4391-001S CABLE, POWER DISTRIBUTION PCB TO CONTROL PANEL PCB   Has connector for receipt presenter motor.     201-5853-001S CABLE, POWER DISTRIBUTION PCB TO CONTROL PANEL PCB   FOR UNITS EQUIPPED WITH TREPP CONTROL PANEL PCB'S.     201-3583-001S CABLE, POWER DISTRIBUTION PCB TO FLOPPY   4 conductor cable with an 8 pin and a 4 pin connector.     201-3579-001S CABLE, POWER DISTRIBUTION PCB TO MAIN PCB   4 conductor cable with an 8 pin and a 6 pin connector.     201-4390-001S CABLE, POWER DISTRIBUTION PCB TO PRINTER PCB   Has a connector for the receipt presenter motor.     201-3582-001S CABLE, POWER DISTRIBUTION PCB TO SDD DISPENSER   6 conductor cable with a 6 pin and an 8 pin connector.     201-3578-002S CABLE, POWER SUPPLY TO POWER DISTRIBUTION PCB   Used if Power Distribution PCB is equipped with slow blow fuses and    the Power Supply is equipped with a terminal strip at TB-2.     202-4691-001S CABLE, POWER SUPPLY TO POWER DISTRIBUTION PCB   Used if Power Distribution PCB is equipped with resettable fuses and    the Power Supply is equipped with a terminal strip at TB-2.   Connects a 642-0005-001 Power Supply to a 201-4670-001 or 002   Power Distribution PCB.     202-4690-001S CABLE, POWER SUPPLY TO POWER DISTRIBUTION PCB   Used if Power Distribution PCB is equipped with resettable fuses and    the Power Supply is equipped with a 9-pin header.   Connects a 642-0009-001 Power Supply to a 201-4670-001 or 002    Power Distribution PCB.     201-4114-001S CABLE, PRINTER TO PRINTER PCB (FUJITSU)     201-4115-001S CABLE, PRINTER PCB TO COMM PCB   2 wire cable assembly.     201-4116-001S CABLE, PRINTER PCB TO COMM PCB                       6 wire cable assembly.     201-3623-001S CABLE, TELEPHONE, EXTERNAL   Power Distribution PCB to wall outlet/surge suppressor.   Includes ferrite bead.     201-3603-001S CABLE, TELEPHONE, INTERNAL   Power Distribution PCB to Main PCB.     201-3988-001S CAM, DOOR HANDLE   Door handle shaft extends through this part.   Cam turns lockplate when handle is turned.     201-3659-001S CAM, FRONT COVER LOCK   Mounts onto back of front cover lock.     644-0019-001S CARD READER, SMALL     201-2248-001S CARD KIT, MAGNETIC (QTY=10)   Used for logging into menus.   Cards must be programmed into unit before using.     201-3683-001S CARD KIT, TEST/DEMO (QTY=20)   Used to perform transactions on unit with demo software.     644-0024-067S CASSETTE, SDD DISPENSER   Bills are loaded into this part.   $50.00 core value if the part is received in rebuildable condition.     R644-0024-067 CASSETTE, SDD DISPENSER, RECONDITIONED     201-4374-001S CATCH, FRONT COVER   Mounts onto inside of front cover.   Cam on front cover lock engages this to keep front cover closed.     502-1079-001S CLEANER CARD KIT, CARD READER (QTY=20)   Cleans the Card Reader head.     644-0024-056S CLIP KIT, CASSETTE RETAINER,  LEFT (QTY = 6)   Mounts on inside of SDD Dispenser.     644-0024-057S CLIP KIT, CASSETTE RETAINER,  RIGHT (QTY = 6)   Mounts on inside of SDD Dispenser.     644-0024-068S DISPENSER, SDD   Does not include cassette.   $100.00 core value if the part is received in rebuildable condition.     R644-0024-068 DISPENSER, SDD, RECONDITIONED   Does not include cassette.     633-0022-001S DISPLAY, COLOR   Includes bulb.   Bulb is not field replaceable.      633-0011-004S DISPLAY, MONO   Includes bulb.     201-3896-001S DOUBLE DETECT ADJUSTMENT KIT   FOR SDD DISPENSER.   Includes tester, 25 black test notes and instructions.     201-3862-001S DOUBLE DETECT TESTER   FOR SDD DISPENSER.   Initiates dispense, indicates correct setting.     201-5448-001S DOWNLOAD KIT, FOR INJECTING OPERATING SOFTWARE   Includes program for loading operating software & cables.    Does not include operating software.      201-3664-001S DOWNLOAD KIT, MASTER KEY   Does not include master keys.   Master keys must be obtained from the Host/Processor.   Includes cables and disk.     450-0105-123 EXPEDITION CHARGE   Will be applied to all rush orders, ie: overnight, 2nd day, 3rd day,    or same day customer pickup).     644-0020-001S FLOPPY DRIVE     635-0019-001S FUSE HOLDER   Fuse for incoming AC power is housed in this.     635-0020-026S FUSE KIT, 2 AMP, SLO-BLO (QTY=50)   For F3, F4 & F5 positions on the Power Distribution PCB.     635-0020-030S FUSE KIT, 3 AMP, SLO-BLO (QTY=50)   For incoming AC power, F1 and F2 positions on the Power    Distribution PCB.     201-3982-001S GEAR KIT, RECEIPT  PRESENTER (QTY = 8)   Has dual gear drive.   Worm gear on motor drives this gear, which drives the roller gear.     201-3981-001S GEAR KIT, RECEIPT  PRESENTER MOTOR (QTY = 8)   This is the worm gear on the motor shaft.      502-1221-004S HANDLE, DOOR   Operates the locking rods on the cabinet door.     450-0105-149 KEY DECODING FEE   Charged when duplicate keys are made from an existing key sent to    Tidel.     201-4379-002S KEYPAD, ALPHA/NUMERIC     201-4380-001S KEYPAD, FUNCTION, LEFT     201-4380-002S KEYPAD, FUNCTION, RIGHT     644-0024-070S KEYS, CASSETTE, SDD DISPENSER W/2 KEYS   Used to prime cassette window to green.     502-1149-003S KEYS, FRONT COVER (QTY=20)   These keys will only operate locks that were shipped from Tidel   keyed alike, (part # 502-1149-002).     00088503S KEYS, MEDECO, REPLACEMENT   FOR MANAGER KEYS.   Minimum 2 keys per code.   Order must be faxed in or mailed in.   Can be cut from an existing key, but decoding fees will apply.    Average three week delivery time.     00010501S KEYSWITCH, MEDECO W/4 KEYS   Momentary contact, spring loaded.     201-2838-001S KEYSWITCH, MEDECO, W/CABLE & 4 KEYS   Momentary contact, spring loaded.     502-1232-003S LATCH ASSY, FRONT COVER   Includes latch and nipple.   Mounts onto door and inside front cover.     201-4373-001S LENS, DISPLAY, COLOR/MONOCHROME   Mounts in front of Display.     502-1198-002S LOCK, COMBINATION     201-4710-001S LOCK, ELECTRONIC, LAGARD   Has keypad for combination entry.   Operated by 9 VDC battery.     201-4710-003S LOCK, ELECTRONIC, LAGARD, LEVEL 1 CABINET   Has keypad for combination entry.   Operated by 9 VDC battery.     502-1216-001S LOCK, ELECTRONIC, MAS HAMILTON   Mounts on door.     502-1149-001S LOCK, FRONT COVER W/2 KEYS   Keyed differently.   Does not include cam.     502-1149-002S LOCK, FRONT COVER W/2 KEYS   This part will be keyed same as all locks with this part #.   Does not include cam.     450-0139-001S MANUAL, OPERATOR   FOR is-1000 ONLY.     626-0011-001S MODEM (2400)     626-0011-004S MODEM (33.6K)     201-4012-001S MOTOR, RECEIPT PRESENTER   Motor with cable and worm gear.   Replaces 201-3776-001S.   Mounts on receipt presenter.     201-3820-003S PAPER, THERMAL, 1/2 CASE (QTY=8 - 5" ROLLS)     502-1223-003S PAPER, THERMAL, 1/2 CASE (QTY=25 - 3" ROLLS)     201-3820-002S PAPER, THERMAL, CASE (QTY=16 - 5" ROLLS)     502-1223-002S PAPER, THERMAL, CASE (QTY=50 - 3" ROLLS)     642-0007-001S PCB, BALLAST   Mounts to Control Panel PCB.   Supplies AC power to the fluorescent light under display.     201-3990-500S PCB, CONTROL PANEL   Does not include fluorescent light ballast PCB.   $20.00 core value if the part is received in rebuildable condition.     R201-3990-500 PCB, CONTROL PANEL, RECONDITIONED   Does not include fluorescent light ballast PCB.     204-0510-001S PCB, CONTROL PANEL ASSY, EPPi   Includes keypads and Control Panel PCB, assembled.   Cannot be dis-assembled in the field.     644-0024-043S PCB, MAIN, SDD DISPENSER   Mounts at rear of dispenser.     201-4190-500S PCB, MAIN   Has 2400 modem and 1 meg available memory.   $50.00 core value if the part is received in rebuildable condition.     R201-4190-500 PCB, MAIN, RECONDITIONED   Has 2400 modem and 1 meg available memory.     201-4190-502S PCB, MAIN   Has 2400 modem and 3 meg available memory.   $50.00 core value if the part is received in rebuildable condition.     R201-4190-502 PCB, MAIN, RECONDITIONED   Has 2400 modem and 3 meg available memory.     201-4190-504S PCB, MAIN   FOR UNITS WITH COLOR DISPLAYS.   Has 33.6K modem and 1 meg available memory.   $50.00 core value if the part is received in rebuildable condition.     R201-4190-504 PCB, MAIN, RECONDITIONED   Has 33.6K modem and 1 meg available memory.     201-4190-505S PCB, MAIN   Has 33.6K modem and 3 meg available memory.   $50.00 core value if the part is received in rebuildable condition.     R201-4190-505 PCB, MAIN, RECONDITIONED   Has 33.6K modem and 3 meg available memory.     R201-4190-600 PCB, MAIN, RECONDITIONED   Has 2400 modem and 1 meg available memory.     R201-4190-602 PCB, MAIN, RECONDITIONED   Has 2400 modem and 3 meg available memory.     R201-4190-604 PCB, MAIN, RECONDITIONED   Has 33.6K modem and 1 meg available memory.     R201-4190-605 PCB, MAIN, RECONDITIONED   Has 33.6K modem and 3 meg available memory.     201-4670-002S PCB, POWER DISTRIBUTION   HOUSES RESETTABLE FUSES.   Includes (2) DC power cables for connecting the Power Distribution PCB   to a Power supply equipped with terminal strip connections at TB2 or   a Power Supply equipped with a 9-pin header at terminal J10.     644-0031-004S PCB, PRINTER (FUJITSU)     201-4120-001S PCB, PRINTER COMMUNICATION   Cable from Main PCB to Printer connects to this PCB.     644-0024-042S PCB, TIMING/FEED SENSOR, SDD DISPENSER   Mounts on left side of dispenser (facing front of unit).   Has 2 infrared sensors mounted on PCB.     201-4387-001S PLATE, RECEIPT PRESENTER   Top plate.   Roller assembly mounts to this part.     201-4396-001S PLATE, RECEIPT PRESENTER   Bottom plate.     643-0007-001S POWER CORD   External, wall socket to unit.     642-0016-001S POWER SUPPLY   Supplies DC voltage to the Power Distribution PCB.   Includes cables & brackets for mounting.     644-0031-006S PRINTER, (FUJITSU)     644-0036-026S RAIL KIT, CASSETTE (QTY = 2)   Black rails on outside of cassette.     644-0024-072S RAIL KIT, DISPENSER (QTY = 2)   Straight, black rails that mount on inside of Dispenser.     201-4395-001S RECEIPT PRESENTER ASSY   Includes drive motor, top and bottom plates (assembled).   Mounts on Printer assembly.     502-1227-100S RUBBER STOP KIT, DISPENSER SLIDE RACK (QTY=4)     644-0024-034S SENSOR, EXIT   FOR SDD DISPENSERS WHICH HAVE METAL RODS EXTENDING   THROUGH THE PLASTIC NOTE PATH GUIDES AT THE TOP OF   THE DISPENSER ONLY.     644-0024-073S SENSOR, EXIT   FOR SDD DISPENSERS WHICH HAVE PLASTIC BRACING   ON THE UPPER INSIDE, ABOVE THE CASSETTE.   Mounts where notes exit the dispenser.     201-3591-002S SENSOR, PAPER LOW     201-4451-001S SURGE PROTECTOR   For noisy power/phone lines.     00006000S SWITCH KIT, DOOR (QTY=3)   Indicates the position of the doors.     201-4882-001S SWITCH , MANAGER/PROGRAM MENU ENTRY, W/CABLE   FOR UNITS EQUIPPED WITH PUSH-BUTTON MANAGER SWITCHES.   Mounts above power cord.   When pressed, allows code entry to program menus.   Includes cable.     201-3777-002S SWITCH, PAPER FEED W/CABLE   Mounts on printer mounting bracket, between the printer and floppy.     450-0090-001S TEST NOTE KIT, DOUBLE DETECT (QTY=10)   Used for setting the double detect adjustment on SDD Dispensers.     644-0024-055S TIMING DISK, SDD DISPENSER   Round, plastic with slits in disk.     201-4570-001S TOUCHPAD W/MOUNTING PLATE   Keypads contact this part when pressed.     201-5362-001S TOUCHPAD W/MOUNTING PLATE   Keypads contact this part when pressed.   For units equipped with TREPP/EPPi Control Panel PCB's     644-0024-069S TRAY, CASSETTE LOADING, SDD DISPENSER   Used to open the cassette.   Cassette slides onto this.     R644-0024-069 TRAY, CASSETTE LOADING, SDD DISPENSER, RECONDITIONED   Used to open the cassette.     201-5586-004S TRIPLE DES/EPPi UPGRADE KIT   Includes EPPi Control Panel PCB assembly, Touchpad, Card    Reader cable, communication cable, Ballast PCB power cable, Control    Panel PCB power cable, mounting brackets and hardware.            PRICES SUBJECT TO CHANGE WITHOUT NOTICE!