Anycard SC

SKU DESCRIPTION     201-4495-001 AIMS SOFTWARE PACKAGE   Includes compact disk and parallel port Hasp Key.     201-4495-002 AIMS SOFTWARE PACKAGE   Includes compact disk and USB port Hasp Key.     501-1085-002S ANCHOR KIT   Includes 4 spike anchors.   Secures mounting plates to the floor.   Requires 1/2" masonry bit.     634-0002-001S BEEPER, ALARM   Makes audible noise when unit goes offline.     644-0024-012S BELT, DISPENSER, LARGE, SDD DISPENSER   Large belt, right side, facing front of dispenser.     644-0024-002S BELT, DISPENSER, SMALL, SDD DISPENSER   Small belt, right side, facing front of dispenser.     644-0024-010S BELT, DISPENSER, TIMING, SDD DISPENSER   Small belts, left side, facing front of dispenser.     201-4588-001S BRAILLE UPGRADE KIT, ARROW KEYPAD   FOR COLOR DISPLAYS WITH SMALL, ARROW KEYPAD.   Includes faceplate decal and the alpha/numeric keypad.     201-4654-001S BRAILLE UPGRADE KIT, LARGE (5/16") FUNCTION KEYPADS   FOR UNITS WITH PLASMA DISPLAYS.   Includes receipt presenter assembled on faceplate.   Faceplate includes Braille decal.   Includes keypads.   If unit is not equipped with a motorized receipt presenter, the Control    Panel PCB must also be replaced.   If the unit is eqipped with a software version below 2.02, the Main PCB   must be replaced.     201-4653-001S BRAILLE UPGRADE KIT, SMALL (3/16") FUNCTION KEYPADS   Includes alpha/numeric keypad, decals for left & right function    keypads, and a decal for the aplha/numeric keypad.     633-0011-003S BULB, FLUORESCENT, KYOCERA   Mounts to bottom of display chassis.   Cannot be used to replace bulbs on SHARP displays.   KYOCERA displays have metal corners on the backside of the    display chassis.   Includes palstic housing.     633-0011-006S BULB, FLUORESCENT, SHARP   Mounts to bottom of display chassis.   Cannot be used to replace bulbs on KYOCERA displays.   Does not include plastic housing for bulb. Must use existing housing.   SHARP displays have black plastic inserts in the backside corners    of the display chassis.     201-2834-002S CABLE, AC POWER RECEPTACLE TO POWER SUPPLY   FOR UNITS W/SDD DISPENSERS.   Used when replacing Power Supplies equipped with terminal strip   connections at TB-2.     201-4299-001S CABLE, CONTROL PANEL PCB TO BALLAST PCB   4 conductor cable.     201-3602-001S CABLE, CONTROL PANEL PCB TO SMALL CARD READER   Flat ribbon cable.     201-4015-001S CABLE, DOWNLOAD, MASTER KEY, LONG CABLE   Has female DB-9 connectors on both ends of the cable.   Requires 201-3649-001S cable to make a complete download cable.     201-3649-001S CABLE, DOWNLOAD, MASTER KEY, SHORT CABLE   Has male DB-9 connector on one end and a 6-pin terminal connector   on the opposite end.   Requires 201-4015-001S cable to make a complete download cable.     638-0025-001S CABLE, KEYPAD TO DISPLAY PCB (PLASMA DISPLAY)   Very small ribbon cable.     201-3585-001S CABLE, MAIN PCB TO BEEPER     201-4297-001S CABLE, MAIN PCB TO COLOR DISPLAY                           201-3620-001S CABLE, MAIN PCB TO DISPLAY/CONTROL PANEL PCB   Comm-1 cable, connects J11 on the Control Panel PCB.    6 conductor cable.     201-3586-001S CABLE, MAIN PCB TO DOOR SWITCH     201-3601-001S CABLE, MAIN PCB TO FLOPPY DRIVE   Flat ribbon cable.     201-4328-001S CABLE, MAIN PCB TO MONOCHROME DISPLAY     201-3599-001S CABLE, MAIN PCB TO PRINTER PCB   Flat ribbon cable.   Communication cable.     201-3600-001S CABLE, MAIN PCB TO SDD DISPENSER   Flat ribbon cable.     201-3580-001S CABLE, POWER DISTRIBUTION BD TO DISPLAY PCB   3 conductor cable with a 6 pin and an 8 pin connector.     201-3581-001S CABLE, POWER DISTRIBUTION BD TO EPSON PRINTER PCB   4 conductor cable with an 8 pin and a 9 pin connector.     201-3583-001S CABLE, POWER DISTRIBUTION BD TO FLOPPY   4 conductor cable with an 8 pin and a 4 pin connector.     201-4113-001S CABLE, POWER DISTRIBUTION BD TO FUJITSU PRINTER PCB     201-3579-001S CABLE, POWER DISTRIBUTION BD TO MAIN PCB   4 conductor cable with an 8 pin and a 6 pin connector.     201-3582-001S CABLE, POWER DISTRIBUTION BD TO SDD DISPENSER   6 conductor cable with a 6 pin and an 8 pin connector.     201-3578-002S CABLE, POWER SUPPLY TO POWER DISTRIBUTION PCB   Used if Power Distribution PCB is equipped with slow blow fuses and    the Power Supply is equiped with a terminal strip at TB-2     201-4690-001S CABLE, POWER SUPPLY TO POWER DISTRIBUTION PCB   Used if Power Distribution PCB is equipped with slow blow fuses and   Power Supply is equipped with 9-pin header.   Connects a 642-0009-001 Power Supply to a 201-3530-001 Power    Distribution PCB.     202-4691-001S CABLE, POWER SUPPLY TO POWER DISTRIBUTION PCB   Used if Power Distribution PCB is equipped with resettable fuses and   the Power Supply is equipped with a terminal strip at TB-2.   Connects a 642-0005-001 Power Supply to a 201-4670-001 or 002   Power Distribution PCB.     201-4115-001S CABLE, PRINTER PCB TO COMM PCB (FUJITSU)   2 wire cable assembly.     201-4116-001S CABLE, PRINTER PCB TO COMM PCB (FUJITSU)   6 wire cable assembly.     201-3584-001S CABLE, PRINTER TO PRINTER PCB (EPSON)     201-4114-001S CABLE, PRINTER TO PRINTER PCB (FUJITSU)     201-3623-001S CABLE, TELEPHONE, EXTERNAL   Power Distribution PCB to wall outlet/surge suppressor.   Includes ferrite bead.     201-3603-001S CABLE, TELEPHONE, INTERNAL   Power Distribution PCB to Main PCB.     201-3509-001S CAM, DOOR LOCK   Attaches to back of vault door locks.     201-3330-001S CAM, FRONT COVER LOCK   Mounts onto back of front cover lock.     201-3891-001S CAM, STOP, MAS HAMILTON LOCK   Attaches to the bolt of the electronic lock.   Stops lower cam from turning until bolt is retracted.   For MAS HAMILTON SYSTEM 2000 lock.     201-2248-001S CARD KIT, MAGNETIC, (QTY=10)   Used for logging into menus.   Cards must be programmed into unit before using.     201-3683-001S CARD KIT, TEST/DEMO (QTY=20)   Used to perform transactions on unit with demo software.     644-0019-001S CARD READER, SMALL, NO LED     644-0024-067S CASSETTE, SDD DISPENSER   Bills are loaded into this part.   $50.00 core value if the part is returned in rebuildable condition.     R644-0024-067 CASSETTE, SDD DISPENSER, RECONDITIONED     201-3595-001S CATCH, FRONT COVER   Mounts onto inside of front cover.   Cam on front cover lock engages this to keep the front cover closed.     502-1202-001S CHAIN, FLOOR MOUNT   For serial #'s after IM-01934.     502-1079-001S CLEANER CARD KIT, CARD READER (QTY=20)     644-0024-056S CLIP KIT, CASSETTE RETAINER,  LEFT (QTY = 6)   Mounts on inside of SDD Dispenser.     644-0024-057S CLIP KIT, CASSETTE RETAINER,  RIGHT (QTY = 6)   Mounts on inside of SDD Dispenser.     644-0026-001S CUTTER, EPSON PRINTER     201-4594-003S DECAL, BRAILLE, ALPHA/NUMERIC   FOR UNITS W/SMALL (3/16") RECTANGULAR KEYPADS.   Mounts to the left of the alpha/numeric keypad.     201-4594-001S DECAL, BRAILLE, LEFT FUNCTION   FOR UNITS W/SMALL (3/16") RECTANGULAR KEYPADS.     201-4594-002S DECAL, BRAILLE, RIGHT FUNCTION   FOR UNITS W/SMALL (3/16") RECTANGULAR KEYPADS.     201-4204-001S DECAL, FACEPLATE   FOR UNITS WITH RECESSED DISPLAY AREAS.   Has "receipt" and card insertion instructions silk screened onto decal.   Covers all of faceplate area except the recessed area around the    display.     201-4205-002S DECAL, FACEPLATE W/BRAILLE   FOR UNITS W/SMALL, ARROW TYPE KEYPADS.     201-3558-001S DECAL,  FACEPLATE, LARGE KEYPAD   FOR UNITS W/LARGE (5/16") RECTANGULAR KEYPADS.   Has TIDEL logo, receipt, and card reader instructions silk screened    onto decal.     201-4133-001S DECAL, FACEPLATE, SMALL KEYPAD   FOR UNITS W/SMALL (3/16") RECTANGULAR KEYPADS.   Has TIDEL logo, receipt, and card reader instructions silk screened    onto decal.     644-0024-068S DISPENSER, SDD   Does not include cassette.   $100.00 core value if the part is returned in rebuildable condition.     R644-0024-068 DISPENSER, SDD, RECONDITIONED   Does not include cassette.     633-0022-001S DISPLAY, COLOR   Includes bulb.   Bulb is not field replaceable.    Replaces Sharp & Kyocera displays.     633-0011-004S DISPLAY, MONO   Includes bulb.     633-0010-001S DISPLAY, PLASMA   Black and orange operating screen.     201-3896-001S DOUBLE DETECT ADJUSTMENT KIT, SDD DISPENSER   Includes tester, 25 black test notes and instructions.     201-3862-001S DOUBLE DETECT TESTER, SDD DISPENSER   Initiates dispense, indicates correct setting.     201-5448-001S DOWNLOAD KIT, FOR INJECTING OPERATING SOFTWARE   Includes program for loading operating software & cables.    Does not include operating software.      201-3664-001S DOWNLOAD KIT, MASTER KEY   Does not include master keys.   Master keys must be obtained from the Host/Processor.   Includes cables and disk.     450-0105-123 EXPEDITION CHARGE   Will be applied to all rush orders, ie: overnight, 2nd day, 3rd day    or same day customer pick up.     201-4201-001S FACEPLATE, ARROW TYPE KEYPAD   Keypads and Card Reader extend through this.   Does not include decals (2).     201-3557-001S FACEPLATE, LARGE (5/16") FUNCTION KEYPADS   Keypads, Card Reader, and receipt guide extend through this.   Does not include decal.     201-4130-001S FACEPLATE, SMALL(3/16") FUNCTION KEYPAD   Keypads and Card Reader extend through this.   Does not include decal.     644-0020-001S FLOPPY DRIVE   Mounts above printer.     635-0019-001S FUSE HOLDER   Fuse for incoming AC power is housed in this.     635-0020-026S FUSE KIT, 2 AMP, SLO-BLO (QTY=50)   For F3, F4 & F5 positions on the Power Distribution PCB.     635-0020-030S FUSE KIT, 3 AMP, SLO-BLO (QTY=50)   For incoming AC power, F1 and F2 positions on the Power    Distribution PCB.     201-3982-001S GEAR KIT, RECEIPT PRESENTER (QTY = 8)   Has dual gear drive.   Worm gear on motor drives this gear, which drives the roller gear.     201-3981-001S GEAR KIT, RECIEPT PRESENTER MOTOR (QTY = 8)   This is the worm gear on the motor shaft.      201-4277-002S KEYPAD, ALPHA/NUMERIC WITH BRAILLE   FOR UNITS WITH SMALL, ARROW TYPE KEYPADS.   Has alpha/numeric characters.   ENTER key is green, CLEAR key is red and #5 has Braille.     201-4101-002S KEYPAD, ALPHA/NUMERIC WITH BRAILLE   FOR UNITS W/SMALL (3/16") RECTANGULAR FUNCTION KEYPADS.   # 5 key has Braille.     201-4101-001S KEYPAD, ALPHA/NUMERIC, SMALL   FOR UNITS W/SMALL (3/16") RECTANGULAR FUNCTION KEYPADS.   Has alpha/numeric characters, ENTER and CLEAR keys.     201-4102-001S KEYPAD, FUNCTION, SMALL   Mounts on left & right side of display.   For replacement of keypads 3/16" high.     201-4158-001S KEYPAD, FUNCTION, SMALL ARROW TYPE   Mounts on left and right side of display.     644-0024-070S KEYS, CASSETTE, SDD DISPENSER (QTY=2)   Used to prime cassette window to green.     502-1149-003S KEYS, FRONT COVER (QTY=20)   These keys will only operate locks that were shipped from Tidel   keyed alike, (part # 502-1149-002).     00088503S KEYS, MEDECO, REPLACEMENT   Minimum 2 keys per code.   Verbal order not accepted.   Can be cut from an existing key, but decoding fees will apply.    Average three week delivery time.     00010501S KEYSWITCH, MEDECO W/4-KEYS   Momentary contact, spring loaded.     201-2838-001S KEYSWITCH, MEDECO, W/CABLE & 4 KEYS   Momentary contact, spring loaded.     502-1192-001S LATCH ASSY, HIDDEN, FRONT COVER   Includes latch, latch housing (bracket) and nipple.     201-4183-001S LENS, DISPLAY, COLOR   Plastic, clear.   Covers display.     201-3478-001S LENS, DISPLAY, PLASMA   Plastic, smoke colored.   Covers plasma display.     502-1045-002S LOCK SET, VAULT W/4-KEYS   2 vault door locks, keyed alike.     502-1216-001S LOCK, ELECTRONIC, MAS HAMILTON     502-1149-001S LOCK, FRONT COVER W/2-KEYS   Keyed differently.   Does not include cam.     502-1149-002S LOCK, FRONT COVER W/2-KEYS   This part will be keyed same as all locks with this part #.   Does not include cam.     201-3890-001S LOCK UPGRADE, MAS-HAMILTON   Includes instructions, cam, lock stop, dispenser tray, retaining   clip and electronic lock.     450-0021-001S MANUAL, OPERATOR     450-0040-001S MANUAL, SERVICE                                                 626-0011-001S MODEM (2400)     626-0011-004S MODEM (33.6K)     201-4012-001S MOTOR, RECEIPT PRESENTER   Motor with cable and worm gear.   Replaces 201-3776-001S.   Mounts on receipt presenter.     201-4220-001S MYLAR STRIP KIT, RECEIPT PRESENTER (QTY=5)   FOR PRESENTERS WITH ROLLER MOUNTED ON BOTTOM.    Plastic strip, prevents jamming at presenter roller.     201-3596-003S PAPER, NON THERMAL, 1/2 CASE (QTY=25 ROLLS)     201-3596-002S PAPER, NON THERMAL, CASE (QTY=50 ROLLS)     201-3820-003S PAPER, THERMAL, 1/2 CASE (QTY=8 - 5" ROLLS)     502-1223-003S PAPER, THERMAL, 1/2 CASE (QTY=25 - 3" ROLLS)     201-3820-002S PAPER, THERMAL, CASE (QTY=16 - 5" ROLLS)     502-1223-002S PAPER, THERMAL, CASE (QTY=50 - 3" ROLLS)     642-0007-001S PCB, BALLAST   Mounts to Control Panel PCB.   Supplies AC power to the fluorescent light under display.     201-3990-500S PCB, CONTROL PANEL, COLOR/MONO DISPLAYS   Does not include fluorescent light ballast PCB.   $20.00 core value if the part is received in rebuildable condition.     R201-3990-500 PCB, CONTROL PANEL, COLOR/MONO, RECONDTIONED   Does not include fluorescent light ballast PCB.     201-3691-000S PCB, DISPLAY, PLASMA   Plasma display attaches to this.   $30.00 core value if the part is received in rebuildable condition.     R201-3691-000 PCB, DISPLAY, PLASMA, RECONDITIONED   Plasma display attaches to this.     201-3460-001S PCB, KEYPAD, PLASMA DISPLAY   Mounts between Display PCB and front cover.     201-4190-500S PCB, MAIN, COLOR/MONO DISPLAY   Has 2400 modem and 1 meg available memory.   $50.00 core value if the part is received in rebuildable condition.     R201-4190-500 PCB, MAIN, COLOR/MONO DISPLAY, RECONDITIONED   Has 2400 modem and 1 meg available memory.     201-4190-502S PCB, MAIN, COLOR/MONO DISPLAY   Has 2400 modem and 3 meg available memory.   $50.00 core value if the part is received in rebuildable condition.     R201-4190-502 PCB, MAIN, COLOR/MONO DISPLAY, RECONDITIONED   Has 2400 modem and 3 meg available memory.     201-4190-504S PCB, MAIN, COLOR/MONO DISPLAY   Has 33.6K modem and 1 meg available memory.   $50.00 core value is the part is received in rebuildable condition.     R201-4190-504 PCB, MAIN, COLOR/MONO DISPLAY, RECONDITIONED   Has 33.6K modem and 1 meg available memory.     201-4190-505S PCB, MAIN, COLOR/MONO DISPLAY   Has 33.6K modem and 3 meg available memory.   $50.00 core value if the part is received in rebuildable condition.     R201-4190-505 PCB, MAIN, COLOR/MONO DISPLAY, RECONDITIONED   Has 33.6K modem and 3 meg available memory.     R201-4190-600 PCB, MAIN, COLOR/MONO DISPLAY, RECONDITIONED   Has 2400 modem and 1 meg available memory.     R201-4190-602 PCB, MAIN, COLOR/MONO DISPLAY, RECONDITIONED   Has 2400 modem and 3 meg available memory.     R201-4190-604 PCB, MAIN, COLOR/MONO DISPLAY, RECONDITIONED   Has 33.6K modem and 1 meg available memory.     R201-4190-605 PCB, MAIN, COLOR/MONO DISPLAY, RECONDITIONED   Has 33.6K modem and 3 meg available memory.     201-3686-001S PCB, MAIN, PLASMA DISPLAY   $50.00 core value if the part is received in rebuildable condition.     R201-3686-001 PCB, MAIN, PLASMA DISPLAY, RECONDITIONED     201-3710-001S PCB, MAIN, PLASMA DISPLAY, DEMO SOFTWARE   $50.00 core value if the part is received in rebuildable condition.     644-0024-043S PCB, MAIN, SDD DISPENSER   Mounts at rear of dispenser.     201-4670-002S PCB, POWER DISTRIBUTION   HOUSES RESETTABLE FUSES.   Includes (2) DC power cables for connecting the Power Distribution PCB   to a Power supply equipped with terminal strip connections at TB2 or   a Power Supply equipped with a 9-pin header at terminal J10.     644-0022-003S PCB, PRINTER, EPSON   Mounts on right side of Printer/Floppy assembly.     644-0031-004S PCB, PRINTER, FUJITSU     201-4120-001S PCB, PRINTER COMMUNICATION (FUJITSU)   Cable from Main PCB to Printer connects to this PCB.     644-0024-042S PCB, TIMING/FEED SENSOR, SDD DISPENSER   Mounts on left side of dispenser (facing front of unit).   Has 2 infrared sensors mounted on PCB.     201-3688-001S PLATE, RECEIPT PRESENTER   Bottom plate.   Has punched out spacers.   For receipt presenters with roller mounted on the bottom plate.   201-4021-001S mounts to this part.     201-3689-001S PLATE, RECEIPT PRESENTER   Top plate.   For receipt presenters with roller mounted on the bottom plate.     201-4276-001S PLATE, RECEIPT PRESENTER   Top plate.   For receipt presenters with roller mounted on top plate.     201-4275-001S PLATE, RECEIPT PRESENTER   Bottom plate.   For receipt presenters with roller mounted on top plate.     643-0007-001S POWER CORD   From unit to wall socket/power conditioner to unit.     642-0016-001S POWER SUPPLY   Supplies DC voltage to the Power Distribution PCB.   Includes cables & brackets to mount.     644-0022-002S PRINTER, EPSON, NON THERMAL (IMPACT)   Includes fold down cutter.     644-0031-006S PRINTER, FUJITSU, THERMAL     644-0036-026S RAIL KIT, CASSETTE (QTY = 2)   Black rails on outside of cassette.     644-0024-072S RAIL KIT, DISPENSER (QTY = 2)   Straight, black rails that mount on inside of Dispenser.     201-4151-001S RECEIPT PRESENTER ASSY   Includes drive motor, top and bottom plates (assembled).   For receipt presenters with roller mounted on top plate.   Mounts on faceplate.     201-4021-001S RECEIPT PRESENTER ASSY   Includes drive motor assembled on bottom plate.   For receipt presenters with roller mounted on bottom plate.   Mounts on faceplate.   Requires 201-3689-001S and 201-3688-001S to complete a    receipt drive assembly.     201-3597-001S RIBBON KIT, PRINTER (QTY=5)   FOR EPSON PRINTERS.   Epson ERC-23.     502-1227-100S RUBBER STOP KIT, DISPENSER SLIDE RACK (QTY=4)     644-0024-034S SENSOR, EXIT   For SDD Dispensers which have metal rods extending through the    plastic note path guides at the top of the Dispenser only.   Mounts where notes exit the dispenser.     644-0024-073S SENSOR, EXIT   For SDD Dispensers which have plastic bracing on the  inside, above   the Cassette.   Mounts where notes exit the dispenser.     201-3591-002S SENSOR, PAPER LOW     201-4451-001S SURGE PROTECTOR   For noisy power/phone lines.     00006000S SWITCH KIT, DOOR (QTY=3)   Indicates the position of the doors.     201-3590-001S SWITCH, PAPER FEED W/CABLE, EPSON PRINTERS   Mounts on printer mounting bracket, between the printer and floppy.     201-3777-002S SWITCH, PAPER FEED W/CABLE, FUJITSU PRINTER   Mounts on printer mounting bracket, between the printer and floppy.     450-0090-001S TEST NOTE KIT, DOUBLE DETECT (QTY=10)   Used for setting the double detect adjustment on SDD Dispensers.     644-0024-055S TIMING DISK, SDD DISPENSER   Round, plastic with slits in disk.     201-4400-001S TOUCHPAD W/MOUNTING PLATE, COLOR DISPLAY   Keypads contact this part when pressed.     644-0024-069S TRAY, CASSETTE LOADING, SDD DISPENSER   Used to open the cassette.   Cassette slides onto this.     R644-0024-069 TRAY, CASSETTE LOADING, SDD DISPENSER, RECONDITIONED     201-5845-005S TRIPLE DES UPGRADE KIT   For Anycard sc/td with color or monochrome screen.    $200.00 core credit for the return of the Control Panel PCB if it is   received in rebuildable condition.   Includes Control Panel PCB.   Does not support TREPP.     R201-5845-005 TRIPLE DES UPGRADE KIT, RECONDITIONED           PRICES SUBJECT TO CHANGE WITHOUT NOTICE!